Monthly Archives: October 2016

Xbox 360 Elite Problems

The Xbox 360 Elite was an advanced version of the Xbox 360 console, but this does not mean that it did not have its drawbacks. This article tells you about the Xbox 360 Elite problems that Microsoft totally ignored.

The Microsoft Xbox 360 Elite was released in North America in April 2007, about 2 years after the release of theXbox 360. Problems with the former have been noted since then, as is the case with pretty much all video game consoles, as sooner or later some issues are bound to crop up. The advantage of the Xbox 360 Elite over its predecessor was that it contained a 120 GB capacity of memory, which made it possible to store more games and data on the hard drive of the console.

Today, the Xbox 360 Elite has also become obsolete because now you can purchase the console with a memory of 250 GB. The price dropped to $249 (from $449) after the release of subsequent models, and Microsoft said it would sell the models till stocks last. Like many other Xbox 360 models, Elite also eventually stopped being produced completely.

Even though the model is not produced anymore, people who already own it, have registered some problems which are known to be synonymous with this model alone. Some of these were solved instantaneously, whereas some unfortunate gamers had to deal with some issues which would resurface on a regular basis.

Problems with Xbox 360 Elite

The most common problem that was noted was of the console simply freezing up and not responding to any commands. This may have been caused by a system overheat, and this can be attribute to the fact that the early models were manufactured with more memory than their processors could handle. The first few Elite models contained the Zephyr motherboard, which was taken directly from the original Xbox 360 console. As a result of this, the system would overheat. Later models avoided this problem by coming manufactured with the Falcon 65 nm chipset motherboard. This new and advanced motherboard solved the problem of overheating while playing video games.

If you are facing a system freeze where your console does not respond at all, you need to shut it down for about 24 hours and then try using it the next day after blowing through all the vents and holes to remove any dust that may have settled. This should get rid of the problem that you are facing.

Other Problems

Another common issue is that of disc scratching, which means that the disc being played in the console gets scratched while being played. This is a problem that has been synonymous with all Microsoft Xbox 360 consoles, and cannot be included in a list of these problems alone. Along with this issue, the notorious ‘red ring of death’ also rears its ugly head with the Elite. This is a problem that most gamers thought Microsoft would have fixed by now, but sadly, that is not the case. This red ring of death (RROD) is one of the biggest video problems around, and ruins the gaming experience entirely. If you’re lucky, you won’t suffer some permanent damage to your console in addition to this. RROD is a permanent hardware problem that plagues this console, and it is a major defect in the design of the machine that Microsoft has been unable to get to the bottom of.

Apart from these, there are some other common problems as well that plague users. The controller is essential to all Xbox 360 games, and people have been facing some problems with that too. This can severely limit the use of the console, and frustrate the living daylights out of an individual.

As users of many different machines, we understand that there are bound to be some problems with this hardware sooner or later. This is normal and perfectly acceptable. But when the same problems keep arising in all subsequent models of the same device, we begin to get angry. Microsoft should look into these problems as soon as possible, and ensure that none of their new models suffer from the same problems again.

Tips to Backup Xbox 360 Games on DVDs

If you wish to make a copy of your favorite Xbox 360 game(s), the standard disk burning software on your PC might not be of much help. You will need some special tools to get this job done.

Nowadays, there are a variety of gaming and entertainment devices available in the market. One such device is the Xbox 360, which is manufactured by Microsoft Corporation, and has a wide user base worldwide. This highly advanced gaming console is a tough competitor to Sony’s PlayStation and Nintendo’s Wii. Along with entertaining users with games having high-end graphics, it can also be used as a music and video player to watch TV shows, view photos, and other similar applications.

When it comes to advanced consoles such as the Xbox 360, gaming is the most prominent aspect. The games are usually available on disks, which is a very convenient method of distribution. However, using these disks again and again causes significant wear and tear on them, ultimately rendering them unreadable. It is therefore better to make a backup copy in order to avoid having to repurchase the same game again.

However, making a copy is easier said than done. If you try to burn Xbox 360 games using a standard DVD burning application, it won’t serve the purpose at all. This is because, these specialized game discs have ‘copyright protection’ active, which does not allow one to directly make a copy. But there is a way around this, which lets you make backup copies of your favorite games.

Burning Xbox 360 Games

Those wanting to burn Xbox 360 games should do it for the sole purpose of taking a backup of the game. Remember, distributing copyright protected game discs for profit is illegal, and doing so can have you facing legal penalties.

If you want to burn backup copies of Xbox 360 games, you will necessarily have to purchase and download a game copying software from the Internet. You also have the option of getting a licensed application from your local computer store that would do the job. These software are designed to recognize copyright protected data, copy it, and burn it on an empty disk.

There are many different game duplication software available online as well as in computer stores. If you download/purchase a good one, you will not only be able to burn Xbox 360 games, but also games for Nintendo Wii, PSP, PlayStation, PC games, and other advanced gaming consoles.

Good Game Copying Software

The following are a few popular software programs that you can download from the Internet to make copies of your Xbox 360 game disks.

  • Slysoft CloneCD
  • Easy Backup Wizard
  • BlindWrite
  • Game-Cloner
  • Game Copy Monster
  • Game Copy Wizard

How to Burn Xbox 360 Games

Burning Xbox 360 games is actually quite simple and straightforward. Most of these software function in a very standard manner, much similar to a DVD burning application.

After downloading one from the web, or purchasing one from your local computer store, you need to install it on your computer system. After the installation is complete, open its interface. If you have any difficulties regarding the working of the software, you can refer to the help file on the interface.

Now, put the Xbox game disc in the DVD drive, after which it will be recognized, and a duplicate copy will be made. Once this process is complete, remove the original game disc and insert a blank DVD in the drive. It is advisable to use a dual layer blank DVD.

After the blank DVD is inserted, the game copying application will burn an image of the game on it. When the burning process is complete, you will have a copy of the original Xbox 360 game. You can burn all your favorite games in this manner.

Be it any kind of game of any gaming console, to burn a copy you will inevitably require a game copying application that will recognize copyright protected data from original game disc. Again, remember that duplicated game DVDs are only for personal use and not for redistribution.

Tips to Clean an Xbox 360 Disc

Learn how to clean an Xbox 360 disc that has suffered from scratches, by going through the following article. This will help you save your disc, if possible, before you invest in a new game disc.

Let’s face it, no matter how hard you try, your Xbox 360 disc is bound to get scratched. These scratches appear after a heavy use and when it changes hands after you share it with your friends. Even while the disc is being rotated in the console during a game, it can get scratched. This often renders the disc unreadable and unplayable.

If you pick up your disc and observe closely, you will find that it is full of smudges and dirt along with scratches. There are a few simple maintenance tricks that you can easily try at home without having to invest in expensive disc cleaning kits. These tips and tricks that help you learn how to clean an Xbox 360 at home are discussed below.

Tips to Clean an Xbox 360 Disc at Home

The smudges, oil, dirt and scratches over the Xbox 360 disc, prevent the console from reading the information within it. This often renders the disc unplayable. Many people face this annoying problem and look for solutions that help them to learn how to go about cleaning an Xbox 360 disc that is unreadable. Just follow the simple steps that may help fix scratched Xbox 360 disc.

Step 1
Take a clean paintbrush and use it to clear off any dust on the disk. Then, take a eyeglass polishing cloth and polish the disc. Remember to use only vertical motions. This means that you should wipe from the center to the periphery (edges). Do not use circular motions or you will end up with more scratches.

Step 2
Add a few drops of glass cleaner solution or alcohol on the polishing cloth. Now, polish the disc with the cloth using only the vertical strokes. Allow the disc to dry off from the solution/ alcohol.

Step 3
Add a few drops of car wax on the polishing cloth and clean the disc using vertical strokes. The wax is very useful in filling up any of the spaces left by the scratches in the Xbox 360 disc. Keep in mind that the disc should be clean and dry. Do not allow even a little bit of moisture to remain on the disc or else it may cause further damage to your precious game disc.

Other Methods to Clean an Xbox 360 Disc

Many people ask a question how to clean an Xbox 360 with toothpaste. Some even want to know if banana could help in cleaning an Xbox 360 that is unreadable. These methods too have been proven to help clear off the scratches to some extent. Let us go into the details of these tricks that help clean a gaming disc.

  • Add a few drops of Brasso on a polishing cloth. Use this cloth to polish off the disc in vertical motion. This will help remove the scratches on the disc.
  • You can apply a little bit of toothpaste on the scratched surface of the disc. Use a non-abrasive cloth to polish off the scratches from the center hole, outwards.
  • Application of Vaseline and peanut butter and polishing off with a non-abrasive cloth is also said to be very useful.
  • You can clean your Xbox 360 disc using a banana. All you need to do is take a small piece of a ripe banana and rub it on the surface. Then, take the banana peel and rub it gently on the surface. Take a soft cloth and clean off the disc.

Once you are done, play your disc in the console. If you are lucky, you will be able to play the disc without any trouble. However, if your disc is damaged beyond repair, you will be left with no choice but to discard it. Take good care of your disc and see that you do not carelessly place the disc on any rough or unclean surface. This will avoid dirt, oil, grime and scratches from damaging your disc. Hope the above methods help you revive your disc from scratch damage.

Tips to Look for Before Buying a Used PS3

The PlayStation 3 is one of the hottest-selling products in the used-console market. This Buzzle article lists some of the things to look for before buying a used PS3.

Sony PlayStation, once again, staked claim to the title of the ultimate gaming console, with the release of their latest variant, the PS4, in November 2013. The PlayStation 4 has since gone on to create waves in the gaming world, selling more than 4.2 million units by the end of the year. The ultramodern console, however, will set you back by a hand and a leg. Not all is lost though, if you haven’t inherited your family’s fortune or don’t want to overspend on a gaming console. The PS4, as technologically advanced as it may be, is not exactly light years ahead of its predecessor, the PlayStation 3. In fact, with the release of the next-gen gaming console, the price of the extremely popular PS3 has plummeted. This has brought about a wave of happiness amongst wannabe gamers the world over, who can finally get a PlayStation, and get transported to an entirely different gaming dimension.

The best bargains though, await those who opt for a used PlayStation 3. With the current market situation, you can get away with an absolute steal on a used or refurbished PS3. So, if you too are an avid game enthusiast and the idea of picking up a used PS3 sounds alluring to you, then look no further. This Buzzle article provides with some very handy tips for buying a used PS3.

Is it Safe to Buy a Used PlayStation 3?
Absolutely! Provided, of course, you keep a few basic things in mind.

Buy from a trusted source
As basic as this may seem, this is a factor that most people often tend to overlook. There are plenty of fraudsters out there, but then again, there are plenty of great bargains that go a-begging as well. Recently, there was an instance of a guy from Nottingham, U.K., who got fooled into buying a photo of the Xbox One for £450 (740 USD). To make sure that you don’t get conned too, always remember to read (and re-read) the description and other details of the advert carefully. Some of the best sites to buy a used PS3 are eBay, Amazon, OLX, etc. Craigslist too has some real good deals, but it is a lot harder to verify the authenticity of the source on this site.

If you intend to pick up the console in person, stick with someone you come across through a reference. Also, insist on the original bill receipt and warranty of the machine.

Test the Console
When buying a used PS3 in person, always test it and make sure it is functioning fine. Start the console, and try a game on it. Ensure that the controller responds well, and all the button clicks are detected. Also, test the thumbsticks to see if they are working fine, as these tend to wear out faster than the other buttons. Another thing to look out for is the vibration feedback of the controller. The vibration motors often die out; while this might not be a deal breaker, it certainly is a point you can use while bargaining. Check the peripherals and connecting wires of the console, and ensure that nothing comes out loose.

While making a purchase online, ask as many questions as you need, to verify the condition of the console. Check for the seller’s return policy, and whether the console is covered under warranty.

Look for other freebies
Once you’ve verified and ensured that the console is in good working condition, you could turn your attention to the freebies on offer. The PlayStation 3 ships with one controller. Most gamers buy an additional controller to play multiplayer games. When bargaining for your console, look to get an additional controller thrown in for the same price. The PlayStation Move controller is also a good addition to the PS3, and it uses motion sensing to make game play even more interesting. Most recent PlayStation 3s were shipped with this controller bundled along. Apart from these, game CDs too can make the deal sweeter for you.

Should I opt for a used or refurbished PS3?
If you have a choice between a used and refurbished PS3, we would suggest you go in for the latter. This is because, more often than not, refurbished consoles come with a warranty. Make sure though, that it is refurbished by Sony, or some other reputed dealer, and not by the seller himself. Refurbished consoles also give you the as-good-as-new feel as they usually are kept in a good condition.